- +1 (800) 518-9080
- allianceepoxyflooring@gmail.com
- Newark, NJ 07105
- Mon-Sat 7am - 7pm
At Alliance Epoxy Flooring Corp, every grinding job centers on one promise: delivering surfaces that hold up under real-world conditions. We don’t chase quick fixes or temporary shortcuts. Our focus is on long-term durability through proper surface profiling, accurate leveling, and consistent execution. Each floor we grind receives careful attention, ensuring the finished surface bonds cleanly, drains correctly, and performs reliably day after day.
Concrete grinding creates the foundation for any successful coating or polishing project. We remove high spots, old adhesives, and surface contaminants to expose clean aggregate and open the concrete pores. Each pass is measured for flatness, ensuring coatings bond properly and floors perform as expected for years without peeling or delamination.
Technicians inspect slab condition, measure flatness, and identify high spots or damaged areas requiring correction.
Multi-pass diamond tooling removes uneven areas, opens the pore structure, and creates the correct surface profile.
Flatness tolerance is confirmed, dust is extracted with HEPA systems, and the surface is prepped for coating.
Property managers, facility teams, and contractors trust us because we communicate openly and deliver what we promise. Every concrete grinding project begins with a clear explanation of the process, the timeline, and the results you can expect. We choose the right diamond tooling, follow proven surface preparation standards, and keep your workspace clean throughout the job.
Removes high spots and uneven patches to create a flat, uniform concrete substrate.
Opens concrete pores and increases surface profile for stronger epoxy and coating bonds.
Grinds down raised edges and sidewalk lips to meet ADA compliance standards.
Strips old mastic, tile adhesive, and residue without damaging the underlying slab.
Properly prepared floors let coatings cure faster and extend equipment lifespan.
Ground concrete provides a stable base that prevents coating peeling and delamination.
Diamond grinding removes high spots, opens pores, and creates the surface profile needed for coating adhesion. Each pass follows a grit progression matched to your concrete’s hardness and the profile depth required. The result is a uniform substrate that accepts epoxy, urethane, or other floor systems without delamination, ensuring long-term performance and durability.
Every project starts with a full evaluation of concrete condition and surface profile requirements.
Industrial grinders remove coatings, level high spots, and open pores for maximum coating adhesion.
HEPA vacuum shrouds capture silica dust during grinding for safer work conditions.
Clients receive transparent explanations of surface condition, grit progression, and expected profile results.
Grinding removes surface imperfections, opens the pores of the concrete, and creates the profile needed for coatings to bond properly. It levels high spots and prepares the slab for polishing or sealing.
If you’re planning to apply epoxy or another coating, or if the surface is uneven, flaky, or has old paint and glue residue. Grinding is the first step for any professional finish.
Yes. Diamond grinding strips away glue, mastic, thin-set, and old coatings down to clean concrete. Depending on thickness, it may take multiple passes with progressively finer tooling to get the slab ready.
A standard residential garage usually takes one to two days. Larger commercial spaces or heavily contaminated floors can take longer, depending on square footage and the number of grinding passes required.
Absolutely. Grinding removes high spots and smooths lips created by settling or spalling. It’s the fastest way to eliminate trip hazards on sidewalks, warehouse floors, and parking structures while meeting ADA compliance standards.
Contact Alliance Epoxy Flooring Corp for precision concrete grinding in Newark that gives your floors the flat, clean surface they need for lasting coating adhesion and professional results.
Contact form will appear here. Please configure your GHL Survey Form Shortcode.
