- +1 (800) 518-9080
- allianceepoxyflooring@gmail.com
- Newark, NJ 07105
- Mon-Sat 7am - 7pm
At Alliance Epoxy Flooring Corp, we handle industrial floor installations with one focus: building surfaces that perform under heavy use. We do not cut corners with quick fixes or temporary patches. Our work centers on proper surface preparation, accurate coating application, and lasting adhesion that holds up under forklift traffic and daily wear. Every project receives the same rigorous attention to detail, ensuring your floor operates safely, efficiently, and reliably from day one.
Manufacturing plants, warehouses, and distribution centers demand flooring that can handle relentless forklift traffic, chemical exposure, and constant movement without breaking down. We install multi-layer epoxy and urethane systems designed specifically for these environments. Every surface is prepared using professional grinding and shotblasting to ensure maximum bond strength, then coated with abrasion-resistant finishes that prevent cracking and peeling under pressure.
We evaluate concrete condition, moisture levels, and existing coatings to determine proper preparation depth and coating selection.
Grinders and shotblasters remove contaminants and create the correct surface profile for maximum coating adhesion.
Multi-layer epoxy or urethane systems are troweled and broadcast to meet load and chemical resistance requirements.
Every industrial floor we install meets strict performance benchmarks for chemical resistance, load capacity, and safety compliance. Our team evaluates traffic patterns, moisture levels, and operational demands before recommending a system. Materials are selected for durability under forklift traffic and thermal shock, and application follows precise surface preparation protocols to ensure long-term adhesion and resilience.
Coatings shield concrete from impact, abrasion, and heavy forklift traffic that damages untreated floors.
Applied systems resist solvents, oils, and acids without degrading or staining the substrate.
Proper installation eliminates trip hazards and provides slip resistance for worker safety.
Sealed surfaces clean faster and require less frequent intervention than bare concrete.
High gloss finishes bounce overhead lighting and reduce additional fixture requirements.
Properly installed coating systems protect concrete and delay expensive replacement projects for years.
Industrial floor coatings demand proper surface preparation, tested adhesion methods, and controlled curing conditions. We handle concrete profiling, moisture testing, primer application, and multi-layer coating sequences to meet OSHA and facility-specific standards. Correct installation supports chemical resistance, impact durability, and safe operation under forklift traffic and heavy loads.
Every floor begins with concrete profiling, moisture testing, and complete contamination removal.
We apply urethane cement, polyurea, and epoxy systems using controlled thickness and proper curing.
Coatings resist solvents, acids, and abrasion for long-term factory performance.
Facility owners receive detailed timelines, material specifications, and downtime schedules before work begins.
Most projects finish in three to five days, depending on square footage and the coating system selected. Larger warehouses or facilities with multiple areas may require one to two weeks.
The concrete surface must be ground or shotblasted to create proper profile and adhesion. We remove all contaminants, test for moisture vapor, and repair cracks before applying any coating.
Yes. Properly installed epoxy and urethane systems are designed for heavy equipment loads, including daily forklift and pallet jack traffic, without cracking or wearing through the coating.
Foot traffic is safe after 24 hours. Full vehicle and equipment loads require 72 hours minimum, though cure time varies by coating type and ambient temperature during installation.
We offer a multi-year warranty covering material defects and workmanship. The exact term depends on the coating system you choose and the expected traffic level in your facility.
Contact Alliance Epoxy Flooring Corp for industrial floors engineered to handle forklifts, spills, and years of demanding traffic across Newark and beyond.
Contact form will appear here. Please configure your GHL Survey Form Shortcode.
