- +1 (800) 518-9080
- allianceepoxyflooring@gmail.com
- Newark, NJ 07105
- Mon-Sat 7am - 7pm
At Alliance Epoxy Flooring Corp, every concrete floor mastic removal job is centered around one goal, delivering a clean, prep-ready surface that actually performs. We are not here to offer quick scraping or partial coverage that leaves residue behind. Our focus is on complete removal through mechanical grinding, accurate surface profiling, and thorough substrate preparation. Every slab we work on is treated with attention to detail, ensuring it is free of adhesive contamination, level, and ready for the coating system that follows.
Mastic adhesive bonds aggressively to concrete and interferes with coating adhesion if not fully removed. We use mechanical grinding and surface profiling to strip every trace of residue, leaving a clean substrate ready for epoxy or polished finishes. Each project is approached with safety protocols in place and surface flatness verified before work is complete.
Technicians evaluate the substrate, identify adhesive type, and conduct testing for safe removal procedures.
Diamond grinders and scarifiers mechanically remove mastic layers, leaving a clean, profile-ready concrete surface.
Technicians remove residue, vacuum debris, and confirm proper substrate profile for coating adhesion.
Every mastic removal project we take on is guided by values that don’t shift. We believe in clear explanations before work begins, honest assessments of what the concrete needs, and dependable execution at every stage. Materials and methods are chosen based on what the substrate requires, not what is quickest. You receive straightforward guidance, realistic timelines, and results that hold up under demanding conditions.
Complete mastic removal lets epoxy and other coatings adhere properly to the concrete surface.
Grinding away old adhesive residue creates a uniform profile ready for polishing or coating.
Removing mastic prevents peeling, bubbling, and delamination after your new floor is installed.
Proper prep eliminates rework and lets the coating cure on schedule.
Professional removal handles asbestos mastic safely with full containment and compliance protocols.
A clean substrate extends the life of your polished concrete or coating system by years.
Reliable mastic removal clears adhesive residue completely so epoxy bonds properly. Grinding removes bitumen layers and leaves a profiled surface ready for coating. Testing confirms whether asbestos is present before work begins. Clean substrate prep prevents delamination and supports long-term coating performance across warehouses, industrial floors, and commercial spaces.
Every project starts with a thorough inspection of mastic type and concrete condition.
Industrial grinders and scarifiers remove adhesive layers efficiently without damaging the substrate.
Removers are applied following manufacturer protocols and safety standards.
Clients receive clear explanations of removal methods and surface prep milestones.
Yes. Mastic installed before 1980 often contains asbestos. We test every project first and follow EPA protocols for abatement, containment, and certified disposal when needed.
Mechanical grinding with diamond tooling removes thick deposits efficiently. Chemical strippers work for thin layers, but grinding reaches the profile depth epoxy needs for proper adhesion.
Most residential slabs take one to two days. Larger commercial floors or heavy buildup may require three days, depending on square footage and the number of passes needed.
Absolutely. Even a thin film blocks the bond between concrete and coating. Complete removal and surface profiling are required before any epoxy or polyaspartic system goes down.
Yes. We coordinate lab testing, obtain abatement permits, set up containment barriers, and arrange licensed disposal. You receive documentation proving compliance with all federal and state regulations.
Contact Alliance Epoxy Flooring Corp for thorough mastic removal, clean substrate preparation, and concrete floor surfaces that bond properly in Newark and surrounding areas.
Contact form will appear here. Please configure your GHL Survey Form Shortcode.
