- +1 (800) 518-9080
- allianceepoxyflooring@gmail.com
- Newark, NJ 07105
- Mon-Sat 7am - 7pm
At Alliance Epoxy Flooring Corp, every concrete floor sealer application centers on one goal: creating a durable barrier that actually protects. We skip quick surface treatments and cheap shortcuts that fail within months. Our focus is on achieving long-term protection through proper substrate preparation, correct product selection, and precise multi-coat application. Every floor we seal is treated with attention to penetration depth and coverage uniformity, ensuring it resists staining, repels moisture, and stands up to daily wear without peeling or hazing.
Concrete floor sealer application begins with proper surface preparation and moisture testing to ensure lasting adhesion. We select the right sealer type for your space, whether penetrating silicate for warehouses or topical acrylic for retail floors, then apply it in controlled coats for uniform coverage. The result is a floor that resists stains, moisture, and abrasion while maintaining a clean, professional appearance day after day.
Grinders and shot-blasting equipment open the pores and remove contaminants for proper sealer penetration.
We apply penetrating or topical sealer using sprayers and rollers to ensure uniform coverage.
We confirm cure time, check for haze, and verify water resistance across the surface.
Clear communication drives every concrete floor sealer project we handle. You receive straightforward explanations of substrate conditions, product chemistry, and application timing so decisions make sense without confusion. Materials are reviewed openly, vapor transmission risks are discussed in plain terms, and every recommendation ties to measurable durability and abrasion resistance. Our standards remain consistent from surface profiling through final cure, ensuring the sealer performs as promised for years under real traffic loads.
Sealed floors resist abrasion from foot traffic, equipment, and daily wear without visible degradation.
Sealed surfaces repel dust and grime, making routine maintenance faster and less labor intensive.
Properly applied sealer prevents water intrusion and moisture vapor damage beneath the surface.
Sealed concrete withstands oil, grease, and other chemicals without staining or etching.
Sealer enhances natural color and adds a uniform sheen across entire floor surfaces.
Sealing protects the concrete substrate, reducing repair costs and delaying replacement needs over time.
We clean and profile the concrete surface to remove contaminants and open the pore structure. The right sealer type is selected based on traffic patterns, moisture exposure, and finish requirements. Application follows manufacturer guidelines for coverage rates, drying intervals, and environmental conditions. Properly sealed floors resist staining, reduce dusting, and maintain their appearance under regular use.
Every concrete floor is profiled and cleaned correctly to ensure proper sealer penetration and bonding.
Sealers are applied using proven techniques that guarantee even coverage and long-lasting protection.
High-performance products that resist abrasion, moisture, and chemical exposure over time.
Clients receive straightforward explanations about floor condition, sealer choice, and application timelines throughout each job.
Penetrating sealers work best indoors because they bond chemically below the surface, allowing the concrete to breathe while blocking water and oil intrusion without creating a slippery film.
Most topical sealers last three to five years in moderate traffic. Penetrating sealers last seven to ten years or longer because they protect from within the slab instead of sitting on top.
New concrete must cure fully, usually 28 days, before you apply sealer. Sealing too early traps moisture inside and causes cloudiness, peeling, or failure to bond properly.
Yes. A quality sealer creates a barrier that repels water, oil, grease, and most chemicals, keeping stains on the surface where they can be wiped away before they soak in.
Professional sealing typically runs two to four dollars per square foot, depending on surface condition, sealer type, and prep work required. Volume discounts apply to larger projects.
Contact Alliance Epoxy Flooring Corp for expert advice, honest pricing, and concrete floor sealer application that keeps Newark floors protected and looking sharp.
Contact form will appear here. Please configure your GHL Survey Form Shortcode.
