- +1 (800) 518-9080
- allianceepoxyflooring@gmail.com
- Newark, NJ 07105
- Mon-Sat 7am - 7pm
At Alliance Epoxy Flooring Corp, every profiling project is built around one commitment: preparing surfaces that hold coatings for years. We skip shortcuts and temporary surface treatments. Our work focuses on achieving the correct profile depth, removing contaminants completely, and creating the mechanical bond your floor system requires. Every slab we prepare is treated with precision, ensuring coatings adhere properly and perform reliably under daily traffic.
Concrete floor profiling creates the rough, open surface texture your coating needs to bond permanently. Without it, epoxy and urethane systems peel, bubble, or fail within months. We use shot blasting, diamond grinding, and scarification to reach the correct CSP level for your project, removing contaminants and opening the pore structure so coatings penetrate deep and hold tight for years.
We inspect the slab, check contamination levels, and determine the correct concrete surface profile for your coating system.
Diamond grinders, shot blasters, or scarifiers open the substrate pores and remove weak surface layers with dust control.
Technicians measure profile depth, vacuum dust, and confirm the surface meets adhesion specifications before coating.
Serving contractors and property managers who depend on reliable surface preparation, we follow tested protocols at every stage. Each project begins with a detailed substrate assessment and a clear explanation of recommended CSP levels for the coating system specified. Our work is guided by ICRI standards and dust-control compliance, ensuring surfaces are profiled correctly the first time. The outcome: proper bond strength, reduced delamination risk, and coatings that perform as engineered.
Mechanical surface texture creates strong bond between substrate and coating, preventing early delamination failures.
Consistent CSP levels across the entire slab ensure even coating absorption and curing performance.
Proper substrate preparation significantly increases floor coating lifespan and reduces maintenance intervals.
Eliminates weak adhesion zones that cause bubbling, peeling, and premature coating breakdown.
Open substrate pores allow primers and coatings to penetrate deeply for maximum bonding strength.
Investing in correct profiling prevents expensive coating replacement projects and reduces long-term floor maintenance budgets.
Industrial and commercial spaces rely on correct surface preparation to ensure coatings bond securely. Shot blasting, diamond grinding, and scarifying create the texture and profile level required for adhesion. Each method is chosen based on substrate condition, CSP requirements, and coating type. Proper profiling eliminates contamination, opens pores, and delivers a clean surface ready for long-term floor coating performance.
Every slab is tested for correct CSP level to ensure mechanical bond strength.
Diamond grinders and shot blasters are calibrated to achieve the right texture depth.
HEPA filtration systems capture silica dust for cleaner, safer work sites.
You receive a clear explanation of slab condition and recommended profiling method.
Profiling removes surface contaminants and creates the correct texture for coating adhesion. It opens the concrete pores so coatings can penetrate and bond mechanically to the substrate.
Shot blasting and diamond grinding deliver the most consistent CSP levels for epoxy. Both methods remove laitance and provide the anchor profile most epoxy manufacturers require for warranty compliance.
Most warehouse floors take one to three days depending on size and condition. Smaller commercial spaces can usually be profiled in a single day if access is clear.
Yes, we schedule work during off-hours or section the area so operations continue. Dust control equipment keeps clean zones isolated and safe for workers in adjacent spaces.
Coatings applied to smooth or contaminated concrete peel, bubble, and delaminate within weeks or months. Poor surface prep is the leading cause of coating failure and costly rework.
Contact Alliance Epoxy Flooring Corp for expert concrete floor profiling that creates the precise surface texture your coating needs to bond in Newark and across the region.
Contact form will appear here. Please configure your GHL Survey Form Shortcode.
