- +1 (800) 518-9080
- allianceepoxyflooring@gmail.com
- Newark, NJ 07105
- Mon-Sat 7am - 7pm
At Alliance Epoxy Flooring Corp, every self leveling project starts with one goal: creating a foundation that truly works. We don’t cut corners or rush through the pour. Our focus is on proper surface prep, accurate compound selection, and controlled application that delivers long-term flatness. Every floor we level is treated with precision, ensuring it bonds correctly, cures evenly, and stays level under real-world use.
Floor leveling starts with careful surface preparation and correct product selection for the substrate. We prime concrete properly, mix self-leveling compound to exact specifications, and pour at controlled depths that ensure uniform flatness. The result is a stable, smooth surface ready for tile, vinyl, or any finished flooring, eliminating low spots and uneven transitions that cause long-term problems.
Inspect the slab for cracks, moisture, and debris, then grind and prime the surface for proper bonding.
Mix polymer-modified cement to the right consistency, then pour and spread it evenly across the prepared floor.
Allow the compound to cure fully, then measure floor flatness with a gauge to confirm specs.
Every self leveling project follows a clear system. Surfaces are inspected for proper substrate conditions, primer is applied according to manufacturer specifications, and compound is mixed and poured at controlled thickness. Our process is guided by consistent communication, honest timelines, and respect for your schedule so you know what to expect at every stage.
Creates a perfectly level substrate that meets manufacturer specifications for tile, vinyl, or epoxy installation.
Eliminates low spots and voids where future flooring materials might crack or settle unevenly.
Cures quickly and allows subsequent flooring layers to proceed without extended waiting periods.
Seals porous concrete and prevents moisture transmission that damages finished floors.
Removes trip hazards by filling dips and correcting uneven concrete transitions.
High compressive strength resists settling and maintains flatness under heavy traffic or equipment loads.
Self leveling compound demands accurate mixing ratios, clean substrate preparation, and controlled pour depth to bond correctly. Serving commercial and residential projects across the region, we prime every surface, verify moisture levels, and apply polymer-modified cement at the right consistency to prevent cracking or delamination. Proper surface profiling and gauge control ensure the compound flows evenly, cures without bubbles, and creates a stable base for tile, epoxy, or polished finishes that lasts for decades.
Every project starts with careful evaluation of substrate condition and leveling requirements.
Skilled application ensures proper thickness and uniform coverage across the entire floor.
Polymer-modified materials deliver strong bond strength and crack resistance.
Clients receive detailed explanations of curing time, surface prep, and finish expectations.
Most products allow pours between one-quarter inch and one inch per application. Thicker pours require multiple lifts with curing time between each layer to prevent cracking.
Yes, priming is required to ensure proper bonding. A quality primer seals the substrate, prevents air bubbles, and stops the concrete from absorbing moisture too quickly during the pour.
Walk traffic is typically safe after six to eight hours. Full curing for tile or finish flooring installation usually takes 24 to 48 hours, depending on thickness and humidity.
No, existing flooring must be removed first. The compound needs direct contact with clean, solid concrete to bond properly. Pouring over tile or vinyl will lead to adhesion failure.
Bubbles form when air is trapped during mixing or the surface wasn’t primed. Cracking happens if the pour is too thick, the mix dried too fast, or substrate movement occurred.
We handle every detail of your self leveling project with precision and care. Reach out to Alliance Epoxy Flooring Corp for honest service, expert installation, and a surface you can count on for years.
Contact form will appear here. Please configure your GHL Survey Form Shortcode.
