- +1 (800) 518-9080
- allianceepoxyflooring@gmail.com
- Newark, NJ 07105
- Mon-Sat 7am - 7pm
At Alliance Epoxy Flooring Corp, everything we do is centered around one goal: delivering concrete surfaces that actually perform. We are not here to offer quick fixes or skip the groundwork. Our focus is on creating long-term results through proper grinding, accurate profiling, and consistent moisture testing. Every slab we work on is treated with attention to detail, ensuring your coating adheres correctly, resists failure, and holds up under daily use.
Proper surface preparation determines whether a coating system lasts five years or fifteen. We measure moisture levels, test surface profile depth, and grind concrete to the exact CSP rating your floor requires. Cracks are repaired, contaminants are removed, and the substrate is leveled before any coating touches the slab. Every step follows ICRI guidelines to prevent bubbling, delamination, and premature failure.
Technicians inspect slab condition, test moisture levels, and measure surface profile requirements for proper coating adhesion.
Diamond grinders or shot blasters remove contaminants and create the specified concrete surface profile depth.
Cracks are filled and patched, then industrial vacuums remove all dust for a ready surface.
Every surface is evaluated before work begins. Moisture levels, pH, and profile depth are measured to ensure coatings bond properly and last. Our methods follow industry standards that prevent failures like bubbling, peeling, and delamination. You get a floor prepared correctly the first time, backed by proven techniques and honest answers to every question along the way.
Proper surface profiling creates the mechanical bond needed for coatings to grip without peeling or bubbling.
Diamond grinding removes irregularities and opens pores evenly across the entire slab for uniform results.
Moisture testing and crack repair prevent delamination and coating failures down the road.
Clean, profiled concrete supports coatings that last decades rather than failing early.
Removing contaminants and leveling the substrate ensures your coating looks clean and professional.
Investing in thorough prep work reduces the need for expensive repairs or recoating projects later.
We handle diamond grinding, shot blasting, and crack repair using methods that match the surface profile your coating system requires. Each step removes contaminants, opens pores for proper adhesion, and creates the mechanical anchor points needed for long-term bond strength. Moisture testing and pH checks prevent premature failures. You get a stable substrate that supports decades of reliable performance.
Every slab is ground or blasted to the exact profile needed for lasting coating adhesion.
Professional grinders, scarifiers, and dust containment systems ensure clean, consistent surface preparation.
Concrete moisture levels are measured before prep to prevent coating failure.
You receive straightforward explanations of surface conditions and preparation requirements before work begins.
We handle diamond grinding, shot blasting, crack repair, moisture testing, and profiling. Each step removes contaminants and creates the surface texture your coating manufacturer requires for proper adhesion.
Grinding works for smooth slabs and light surface removal. Shot blasting cuts through heavy coatings, thick adhesives, or deep contamination. We assess your substrate condition and recommend the method that delivers results.
Yes. We remove old epoxy, glue, mastic, tile residue, and paint using mechanical methods. Shot blasting and diamond tooling strip stubborn layers without damaging the substrate, leaving a clean surface ready for new coatings.
Most surfaces are ready for coating within hours after grinding or blasting, provided moisture levels pass. If we patch cracks or repair damage, curing time depends on the repair material used.
Most epoxy and polyurethane systems require CSP 2 to CSP 4, which means visible aggregate and texture. We measure profile depth on every job to match your coating manufacturer’s adhesion specification.
Contact Alliance Epoxy Flooring Corp for expert concrete preparation, honest pricing, and a clean surface that holds coatings across Newark and every nearby area we serve.
Contact form will appear here. Please configure your GHL Survey Form Shortcode.
