- +1 (800) 518-9080
- allianceepoxyflooring@gmail.com
- Newark, NJ 07105
- Mon-Sat 7am - 7pm
Trusted by Local Businesses
Serving Homeowners and Commercial Facilities with Epoxy Flooring and Polished Concrete Solutions Built to Last
Lasting Durability
Seamless Protection
Real Value
You see the cracked surface, the peeling adhesive left from old flooring, the uneven patches that collect water and dirt. Maybe it started small, but now every forklift pass makes it worse, and the coating you applied last year is already failing.
The longer you wait, the more expensive it gets. Operations slow down. Trip hazards pile up. Customers notice the worn look, and the floor you hoped would last decades needs a full redo after just a few seasons.
Alliance Epoxy Flooring Corp delivers epoxy and polished concrete systems that handle everything from forklift traffic to daily foot traffic without cracking, peeling, or fading. We’ve specialized in commercial and industrial floors across Long Island NY since our founding, bringing deep knowledge of waterproofing coatings, metallic finishes, polyurea systems, and concrete grinding.
Our crew prepares every surface with diamond profiling, moisture testing, and adhesive removal to ensure long-term bond strength. We install urethane cement in food facilities, metallic epoxy in showrooms, self-leveling underlayments in warehouses, and grind-and-seal finishes in retail spaces. Each project follows ICRI surface-prep standards and OSHA compliance protocols.
Family-owned and fully insured, we show up on time, document every phase, and stand behind our installs with written warranties. Your floor is the foundation of your operation, and we treat it that way.
Homeowners and businesses gain durable protection, chemical resistance, and lasting shine from properly installed epoxy floor systems.
Warehouses, retail stores, and modern interiors get smooth, low-maintenance surfaces through multi-stage diamond polishing and densification.
Basements, mechanical rooms, and wet-area slabs stay dry with membrane systems and coatings engineered to block moisture penetration.
Patios, showrooms, and garage floors gain rich color and unique character through acid-reactive or water-based decorative stain applications.
High-traffic areas stay smooth and impact-resistant without cracking, peeling, or wearing down after years of forklifts and foot traffic.
Sealed surfaces resist oil, chemicals, and stains so routine cleaning takes minutes instead of hours every week.
Consistent gloss and color hold up through spills and UV exposure so your space looks finished for years to come.
Our epoxy floor exceeded expectations. The prep was thorough, the color turned out exactly as promised, and the metallic finish has held up beautifully under daily shop traffic. The installer answered every question we had and left the space spotless. Worth every penny.
Valeria Z.
Alliance Epoxy Flooring restored our warehouse floor after years of forklift damage. The polished concrete they installed is durable, easy to clean, and looks sharp. The crew showed up on time, worked efficiently, and the result speaks for itself. We’re already recommending them.
Henry F.
So your facility runs smoothly with surfaces that hold up under real-world pressure.
Contact us to schedule a site visit where we measure your space and discuss finish options.
We grind and profile your concrete to create the clean foundation every coating needs.
Our crew applies primer, base coat, and topcoat in sequence so each layer bonds properly and cures strong.
Surface assessment, proper substrate prep, and material selection tailored to your space.
generic estimates with minimal planning.
The same team handles your project start to finish.
rotating crews every visit.
You know what to expect before, during, and after application.
vague timelines and surprise charges.
Proper diamond grinding, controlled flake broadcast, and sealed edges that hold up under traffic.
corners cut and coatings that fail.
Every floor we coat or polish is backed by our work in writing.
warranties that quietly vanish.
Diamond grinding, profiling, and thorough substrate testing before any coating.
With Us
skipped prep and adhesion failures
With Them
Industrial-grade epoxy, polyurea, and urethane systems built to last.
With Us
bargain coatings that peel
With Them
We schedule realistic windows and finish on the agreed date.
With Us
dragging projects and surprise delays
With Them
Every grind pass, broadcast layer, and topcoat applied with precision and care.
With Us
sloppy finishes and uneven coats
With Them
Clear quotes, honest recommendations, and a real warranty you can trust.
With Us
vague estimates and vanishing contractors
With Them
Diamond grinding exposes aggregate and creates the mechanical tooth coatings need for permanent adhesion.
High-solids epoxy and polyurea formulas chemically lock into prepared concrete for lasting durability.
Flake and quartz chips are fully embedded into the wet basecoat for slip resistance and decorative finish.
Aliphatic urethane seals the floor with a clear layer that resists yellowing and scratches under traffic.
Waterproofing coatings block vapor transmission and protect slabs from subsurface water damage.
Honing with progressive diamond grits and densification hardens concrete into a smooth high-gloss surface that lasts.
Commercial kitchens, warehouses, and garages across the tri-state area count on our concrete floor coating and polished concrete systems. We handle moisture testing, diamond grinding, and every finish from epoxy to polyaspartic so your floor stands up to daily wear.
Epoxy systems, polyurea coatings, and polished concrete all handle heavy foot traffic and equipment well, with chemical resistance built in for demanding environments.
Most projects finish in one to three days depending on square footage and coating layers. Single-day systems cure fast enough for next-day use.
Yes. Grinding, crack repair, and a new coating layer restore worn surfaces without tearing out the slab, saving both time and expense.
Diamond grinding creates the correct surface profile so coatings bond permanently. Skipping this step causes peeling, bubbling, and early system failure.
Metallic epoxy and decorative flake finishes are sealed with urethane or polyaspartic topcoats that protect against abrasion, UV fading, and chemical spills.
Contact Alliance Epoxy Flooring Corp for expert installation, honest pricing, and floors that perform for Long Island NY properties.
Contact form will appear here. Please configure your GHL Survey Form Shortcode.
