- +1 (800) 518-9080
- allianceepoxyflooring@gmail.com
- Newark, NJ 07105
- Mon-Sat 7am - 7pm
At Alliance Epoxy Flooring Corp, every flake and quartz coating installation centers on one outcome: a floor that holds up under real use. We skip the shortcuts and temporary fixes that leave owners with peeling edges and uneven texture. Our focus is on proper concrete preparation, accurate resin application, and broadcast techniques that lock color and durability into every square foot. Each project receives the grinding, priming, and sealing steps needed to deliver a surface that performs reliably day after day.
Every flake and quartz coating we install is done right the first time. Concrete surfaces are diamond-ground to proper profile, aggregate is broadcast evenly for full coverage, and topcoats are applied with care to seal the finish. You get a floor that handles daily wear, resists staining, and delivers lasting color without peeling or lifting.
We diamond-grind the concrete to the correct profile and test for moisture vapor emission.
Resin is applied, then decorative flake or quartz aggregate is broadcast evenly to full coverage.
Excess chips are scraped off and a clear UV-stable topcoat is rolled for protection.
Reliable flake and quartz coatings begin with clear answers and straight talk. We explain every step of the installation before work starts so you know exactly what to expect. Materials are sourced for durability, and every surface is prepared to ensure proper adhesion and long-term performance without shortcuts or hidden surprises.
Broadcast flake and quartz layers shield concrete from impacts, abrasion, and heavy traffic damage.
Textured aggregate finish provides reliable traction even when the floor is wet or oily.
Sealed topcoat creates a smooth, non-porous surface that resists stains and wipes clean quickly.
Choose from multiple color blends and broadcast densities to match your space.
UV-stable topcoat and properly cured resin extend floor life under demanding conditions.
Urethane or polyaspartic sealers protect against oil, solvents, and corrosive spills without degrading.
Flake and quartz coatings require even broadcast application and full resin coverage to bond properly. Aggregate is spread at the right density to eliminate voids and weak spots. Each layer is sealed with a UV-stable topcoat that resists yellowing and maintains clarity over years of use. Proper surface profiling before application ensures strong adhesion and smooth, uniform texture across the entire floor.
Concrete is ground and profiled to exact specifications, creating proper adhesion for flake and quartz systems.
Flake and quartz aggregates are distributed evenly using proven techniques to achieve consistent coverage and texture.
High-grade resins and topcoats support impact resistance and long-term floor performance.
You receive straightforward explanations of each installation phase and what to expect after curing completes.
Flake coatings use vinyl chips broadcast into epoxy for a textured, slip-resistant finish. Quartz coatings use mineral aggregates for a harder, smoother surface with higher abrasion resistance.
Most residential garage installs finish in one to two days, depending on surface prep and cure time. Commercial projects may take three to four days for larger square footage.
Yes. You can select from dozens of color blends or create a custom mix. We show samples during the estimate so you see exactly how your floor will look.
Sweep or vacuum regularly to remove grit. Mop with mild soap and water as needed. The sealed surface resists stains and spills without requiring wax or special cleaners.
Absolutely. Full broadcast flake systems topped with polyurethane or polyaspartic coatings are built for high-impact environments, including warehouses, shops, and high-traffic garages.
Serving Newark and the tri-state area with reliable flake and quartz coating systems, Alliance Epoxy Flooring Corp delivers expert installation, honest pricing, and floors built to last.
Contact form will appear here. Please configure your GHL Survey Form Shortcode.
