- +1 (800) 518-9080
- allianceepoxyflooring@gmail.com
- Newark, NJ 07105
- Mon-Sat 7am - 7pm
At Alliance Epoxy Flooring Corp, we handle every prime and coating project with one focus: creating surfaces that perform under real-world use. We don’t offer shortcuts or temporary fixes. Our work is built around proper surface preparation, accurate product selection, and consistent application standards. Every floor we coat is treated with attention to detail, ensuring it bonds correctly, resists wear, and delivers the durability you notice day after day.
Commercial and industrial properties rely on proper primer application to ensure coatings bond permanently and perform under heavy use. We handle surface preparation, moisture testing, and multi-coat sequencing with precision. Every substrate is profiled and cleaned before the first coat touches the floor, preventing delamination and early failure.
Our crew inspects the substrate, measures moisture levels, and profiles the concrete to confirm primer compatibility.
We roll the primer coat at the correct mil thickness, ensuring complete coverage and proper resin penetration.
The finish coat is applied and cured to manufacturer specifications for chemical and abrasion resistance.
Serving floors that demand precision, our approach is built on clear communication and reliable execution. You’ll receive honest recommendations, transparent timelines, and workmanship that holds up under real-world use. Every coat is applied according to manufacturer specifications, and every surface is properly prepped so your Prime & Coating system performs as intended without shortcuts or surprises.
Primer creates a mechanical bond that prevents coating layers from peeling or delaminating over time.
Professional application ensures even coating thickness without thin spots or pooling across the floor.
Proper primer seals concrete and blocks moisture transmission that causes bubbling.
Multi-coat systems with primer last significantly longer under heavy traffic.
Sealed surfaces resist staining and require less frequent deep cleaning.
Coating layers defend substrate against spills, solvents, and corrosive materials in industrial settings.
Serving contractors and facility managers who need reliable substrate bonding, proper prime and coating application begins with surface profiling and moisture testing. Our team applies epoxy or polyurethane primers at the correct mil thickness, then follows with compatible topcoats once cure windows are met. This sequence ensures strong adhesion, prevents delamination, and supports long-term abrasion resistance across high-traffic concrete floors.
Concrete profiling and cleaning ensure primers bond properly without adhesion failure.
Each primer and coating layer is applied at correct mil thickness for uniform coverage.
Two-part epoxy and urethane materials deliver long-term abrasion resistance.
Clients receive clear explanations of application steps and expected cure times.
Primer seals the surface, improves adhesion, and helps the topcoat bond permanently. Without it, coatings often fail early or peel under stress.
Most primers need four to eight hours before recoating, depending on temperature and humidity. We test the surface before moving to the next layer.
Only if the old finish is compatible and fully bonded. We grind or strip incompatible coatings first to ensure proper adhesion and prevent failure.
Moisture vapor, surface contaminants, or applying the coating before the primer cures. Proper prep and timing prevent nearly all delamination problems.
Yes, manufacturer-backed warranties cover both materials and workmanship. The exact term depends on the primer and coating system you choose for your application.
Contact Alliance Epoxy Flooring Corp for professional Prime & Coating service that sets the foundation for lasting durability in Newark and builds a surface ready for years of performance.
Contact form will appear here. Please configure your GHL Survey Form Shortcode.
